Five Handy Tips For Proper Tyre Maintenance

Tyres are crucial to ensure proper driving comfort and safety. They are also one of the major drivers of fuel efficiency and overall vehicle performance. Besides, tyres also coordinate with the vehicle’s suspension system to ensure maximum shock absorption on poor roads.

If you want to ensure your tyre’s pristine condition, just take a routine assessment test to remove any irregularities or discrepancies present. For this reason, you do not need an expert to do the tyre check-up; you can easily do it at home. Here is an article on five handy tips on tyre maintenance.

Maintain The Recommended Tyre Pressure

Irregular tyre pressure is one of the primary causes of slow punctures. Slow punctures are caused when the tyres travel on low air pressure, making the outer wall weak. As a result, the air within starts to slip out, and tyres go flat eventually. 

Conversely, if the tyre pressure is too high, the air within exerts too much force on the inner wall. Therefore, the tyres may burst when the vehicle is speeding or exposed to extreme heat.

Hence, always ensure that tyre pressure is at the recommended level, mentioned either on the fuel cap or the driver’s door. You can screw in a pressure gauge on the tyre’s valve and note the readings, and accordingly, inflate or deflate your tyres.

If you plan to go for a long drive, inflate your tyres Risca with nitrogen gas. Nitrogen is relatively cooler, so it doesn’t expand too much when exposed to heat. Also, nitrogen doesn’t slip out easily, so the tyre pressure can be maintained for a longer time. 

Drive According To The Road

Sidewalls are built in such a manner that they can withstand extreme force and pressure. They are responsible for shock-absorption and tyre safety, and they protect the rest of the tyre from the discrepancies of the surface. If the sidewalls are damaged, the tyre's safety quotient declines, and they may burst as soon as they are exposed to extreme pressure.

One of the primary causes of sidewall damage is unprecedented pressure due to poor roads that are full of patches and potholes. The pressure experienced by the sidewalls increases when the vehicle speeds over these potholes. 

These patches and potholes cause cracks and bulges on the sidewalls. These cracks are the primary reasons for slow punctures, and bulges make the contact patch weak, which increases the risk of tyres bursting.

Rotate Your Tyres At Regular Intervals

Tyre rotation is the process by which every tyre’s position is switched. This is done so that no single tyre is burdened with extra load for the entirety of their age. Usually, the front cheap tyres Newport are only powered in the 2WD, and they carry the extra load of the passengers. As a result, they exert extra pressure into the ground and wear out sooner than other tyres. 

Tyre rotation ensures that all the tyres are subjected to a balanced load, and it also helps save some money on replacement cost.

Take Care Of Alignment And Balancing

When the vehicle covers a considerable distance, the wheels get loose on the axles, and the tyres start moving sideways, which damages the treads. Wheel alignment ensures that the wheels' axle position is restored not to disrupt the linear motion.

Balancing is the process in which load on each wheel is measured, and accordingly, extra weight is added or reduced to balance the weight of the frame on each tyre. This is a compulsory process to ensure the tyre’s durability.