Is Your Netgear Nighthawk Router Not Working? Here’s How to Fix It!

Netgear Nighthawk WiFi router is one of the most recommended wireless routers to establish your home or office network. At times, many users, especially a newbie commonly face difficulties like Netgear router not working, have questions like how to set up and reset the device, etc.

If you are also one of them, then this post might help you. Here, we will not only guide you on how to fix the Netgear Nighthawk router not the working issue but also we will give you steps to configure and reset the device. Let’s get the ball rolling!

First of all, let us make your device up and running.

Fix: Netgear Router Not Working Issue

• Firstly, ensure that your Netgear Nighthawk router is plugged in properly and receiving the proper power supply.
• Then, you have to ensure that the device is placed at the center location of your house or workplace.
• Make sure that you won’t place the device in an area where there are heat and dust.
• If the issue still persists, unplug tour Netgear Nighthawk router, wait for some time and plug it back again. This process is known as “Power cycle”.

Just in case, the above-listed troubleshooting tips don’t help you to resolve the issue, jump onto the next step.

Reset Netgear Nighthawk Router

This process might make your router up and running. Just follow the steps given here in the exact order and you will reset Nighthawk router. Let’s take the plunge!

How to reset Netgear Nighthawk router?

• Make sure that the device is plugged in properly. The LEDs on your WiFi router must be stable. If you hardly see any LED, choose a different socket to plug in the Netgear Nighthawk router.
• Now, if you have connected any of your client devices with the router, disconnect it. Don’t worry! This is only a temporary procedure. Once the Netgear device gets back in working, we will help you to set it up and reconnect all the disconnected devices.
• Once done, locate the reset hole and push it with a paper clip or pin. If it is a button, push it gently with the help of your thumb or finger.
• Hold the reset hole and release it when the power LED on the Netgear Nighthawk router starts blinking.

Fab! The device has been reset successfully.

See, how simple is to reset the Nighthawk router. Congrats! You have become a tech-savvy now. Now that your router has become up and running, you can take the plunge to set it up.

How to Setup Netgear Nighthawk Router?

To setup Netgear router, follow the steps given below.

• Plug in your Netgear WiFi router.
• Wait for a few minutes for the power LED on it to become stable.
• Connect your router to any of the client devices in your home or office.
• Open a web browser. Make sure that you are using the updated one.
• Drag the mouse cursor to the web browser bar and type routerlogin.net or 192.168.1.1
• Press Enter.
• Netgear router login page displays.
• Type in the admin details carefully and after that, simply follow the on-screen instructions. On the displayed page, the setup instructions are given in such a way that you won’t face any issue.
• Once your device is set up properly, you can unplug it and move it to a different location.
• Connect your devices to the router’s WiFi network and start streaming unlimited videos and original TV series without any hassle.

If you still have any concerns about how to setup Nighthawk router, feel free to reach out through the comments section.

Wish you happy streaming!