Secure Way of Linksys Extender Setup

Are you one of those who can't get connected to Linksys Extender Setup page? Well do not worry, in this article we will give you a complete information about the linksys setup and the ways to troubleshoot your problem. To get such information, stick with the article. 

Further in this article you will get to know about the common problems users face during the extender setup and ways to resolve those issues. 

There are two different ways to set up linksys extenders.  

1. Manual method setup

2. WPS method setup 

Essentials before setting up your linksys extender 

Before we start, let us tell you about the essential things you need to know, to get a trouble free setup process.

• Make sure that your extender and router is in the same room during the setup process. Once the setup is done you can relocate your extender to your desired location. 

• Ensure that your existing wifi or router is providing live internet connections. If not, call your internet service provider. 

• Take a note of your admin credentials like username and password, as you will need it while setting up your extender. 

• Once you are sure about the essentials mentioned earlier, you can start the setup process.

Linksys extender setup via manual method

You are about to set up your linksys extender steps manually. Just as the name, steps will be manual. 

Manual methods are quite easy methods to perform. Now, let's get straight to the setup process

• First, plug the switch of your extender into any electrical board and turn it on.

• Ensure that the power LED indicators of your extender are blinking, if not, locate the on/off button and press it. 

• Now connect your extender to your wifi enabled PC, to do so, take any ethernet cable and connect to the lan port of both the devices. 

• Now launch any web browser. Make sure that your web browser is updated. 

• Once your browser is launched click on the address bar and type extender.linksys.com 

• You are now on the linksys extender setup web page. Enter your admin credentials like your username and password and hit the login button. 

• Now choose your network name from the on-screen list and click on it. 

• In the next step, you have to choose between the setup option. Click on the manual option. 

• Now enter your existing network credentials and hit the save button.

• It's time to place your extender near your dead network zone area. Keep your extender on the place where it can get proper live signals from your existing router.  

• You are all set to enjoy buffer free surfing.

Linksys extender setup via WPS method

This method describes wireless protected installment processes. Follow the steps given below to install the linksys extender setup. 

• Make sure that your wifi is providing live internet connections. 

• Place your extender near your existing wifi. 

• Turn your extender on and press and hold the WPS button for a couple of seconds. 

• Repeat the process with your router. 

• Wait until the power LED indicator turns solid white. 

• Once done, launch any web browser and search for extender.linksys.com in the address bar.

• You are on a setup page now, enter your admin credentials and connect to your home network. 

• Once connected, change the location of your extender as per your desire. 

• Now take your smart device and connect it to your new network. 

• Once connected, you are all set to enjoy buffer free streaming. 

Conclusion

If you are still facing any kind of issue regarding linksys extender setup let us know by commenting below in the comment section we will try to reach you with the best assistance as soon as possible. 

Is this article helpful?